Download somnologica for embletta

The patient wears the. Carry out the procedures on the following pages to confirm that the Embletta PDS is in good. If the outside casing is fractured or sensor inlets are damaged, return the unit to. With the. Prepare Recorder button and enter the relevant details. Allow yourself some time.

If it. If it is red there is a problem with the batteries and. With the Sensor Adaptor still connected, insert the sensors into the Adaptor and the. Pressure Luer Lock. While the short test recording is taking place indicated by the double-flashing. The downloading of information is indicated. Once completed, the recording appears as a folder in the Recordings.

The Embletta PDS recorder does not require cleaning after each use, but if required. Do not use acetone or. To clean difficult spots use medical octane or propyl alcohol, then clean with soap. Do not autoclave, ethyl oxidize sterilize or immerse the. Begin by inserting the Sensor Adaptor into the recorder and pressing the Check 3.

The condition of the batteries are indicated by the battery condition lights. The green light indicates the batteries are. The other battery should be in the lower slot with negative end - towards.

A fully charged battery sustains a voltage of 1. Note: Rechargable batteries will not maintain their charge if not used for a long. If the Embletta is still not automatically detected, it can be selected manually. Try turning off these. If recording by external switch check the Use external switch to start and stop.

Note: If you are using the external switch ensure that you start the recording by. Downloading time is dependant upon the number of recording channels used. If all. If the data does not download observe if the Prepare Recorder button is checked. If not, the program will not let you proceed to the next. If you have problems analysing data, first open the traces sheet in Somnologica for. If you have lost one or more signals, the analysis may either not work correctly or. Analysis menu and leave out the analysis that should be dismissed, for example, if.

If the analysis is complete, but you are not happy with the criteria on which the. Note: If you are still unable to complete the analysis notify your distributor for. If it is not, then the signal was either not.

If it is seen, use the. Try using the Scale to Fit option in Somnologica for Embletta: do this by rightclicking the mouse inside the pane. Before starting another study, test the sensor by conducting a short test recording.

If you have no data from the Embletta, try repeating the download procedure. The sensors may cause inaccurate measurement and readings in specific situations. If necessary, shield. Noisy signals from the respiratory band sensors may indicate fractured wires or. If there is a red status light on the Embletta, this means it is not working correctly.

Note: The manufacturer reserves the right to change these specifications without. Product code Date of Purchase Equipment Supplier If applicable: Pressure setting Hour Meter reading Give details of components, PCBs replaced if applicable The LCD on the device facilitates signal quality checks bedside without the need for a computer.

Not available in all countries. Please contact your local sales representative for availability. The Embletta MPR is a fourth generation ambulatory sleep screener designed to be reliable and easy to use. The LCD on the device facilitates signal quality checks at the bedside without the need of a computer. Patient and study management with reliable and flexible study acquisition and review features are the foundations of a robust solution that simplifies sleep diagnostics.

Lead length: 40cm. Page 26 2. Straps are attached around the patient to fit snugly Comes in three different sizes - this is small Connects to plastic buckles on the respiratory belts and Body position sensor. Straps are attached around the patient to fit snugly Comes in three different sizes - this is large Connects to plastic buckles on the respiratory belts and Body position sensor.

Connects to X10, Z10 and Z20 Proxies. Power consumption: 75mW, continuous. Dimensions: Hmm 0. Weight: 23g. Leakage current: Not applicable. Vibration: Mil-Standard C, method Sensors can be cleaned with isopropyl alcohol or ethylene oxide sterilized cold cycle.

Increase the oximeter measurement security. The user's current license key is upgraded to Somnologica Studio. The Somnologica Studio Upgrade is designed for: The Embla and Embletta recorders Preparing, real-time recording, reviewing, scoring recordings and creating reports. The user's current license key is upgraded to Somnologica Studio Review. This plugin allows the software License key to support video recordings which visualize the movements of a patient during a sleep study. This video system offers high-performance compression techniques which allow you to compress the video material down to a manageable size.

Hardware components not included: video camera and video acquisition board. F -SL New Ref. Each license is sold separately. Any client in the local network that has Somnologica installed can use the available license from the Network Software Key.

Users runing the Somnologica Network keep all their Somnologica Licenses on the Network License key, whereas other users keep their licenses on individual license keys. Package contents Qty 1 1 1 Old Ref. The serial number of the license is attached to the license agreement. This item is only sold separately for each Somnologica Network user and as part of Somnologica packages. For network solutions, individual licenses are needed.

The serial number of the license is attached to the license agreement and is used to upgrade the Software key. This item is only sold separately for each Somnologica Network user and as part of Somnologica upgrade packages. The serial number of the license is attached to the license agreement and is used to upgrade the Software Key. This item is only sold separately for each Somnologica Network user and as part of Somnologica Video packages.

Scores the sleep into 5 different stages, active wake, quiet wake, paradoxical sleep, light slow wave sleep and deep slow wave sleep. The scoring epochs range from 2 seconds to 30 seconds. The scoring module allows simultaneous scorings of multiple animals defined in scoring profiles. The Rodent Scoring Module uses 'Scoring profiles' to define it's execution scheme.